Racetorations Track Day/Competition Aluminium Oil Pump – TR5-6
£300.00 ex VAT | £360.00 inc VAT
- Uprated toleranced TR5-6 oil pump fitted with a 90mm diameter pancake type filter replacing the original round version.
- It is located centrally in the deepest part of the sump within 4mm of the bottom to ensure consistent oil pressure even when under hard cornering
- For use with alloy sumps BEN102 & BEN132 only
The standard oil pick up has limitations under extreme oil surge even with sump oil baffling. Momentary pressure loss under race conditions usually results in bearing damage.
The new 90mm diameter pancake type filter is located centrally in the deepest part of the sump within 4mm of the bottom. The pickup is fitted onto our uprated, race prepared oil pump which allows for a higher capacity of oil to flow through.
Baffling is required to reduce rearward oil surge on acceleration therefore BEN131 baffle plate required. (See kit BEN130). Only suitable to be used with an alloy sump such as BEN102 or BEN132. For toleranced oil pump with the standard pickup see BEN118. For use on TR5-6, GT6, Vitesse, 2000 & 2500 engines.
Reviews
There are no reviews yet.