 |
TEN001 |
|
Closed Engine Breather Kit. TR2 to TR6 (TR6 PI Shown in picture). Top (rockerbox) and bottom
(crankcase) balanced breathing into a neat pre drilled oil proof translucent catchtank. Removable lid for
cleaning. All oilproof hoses supplied with flametrap, crankcase breather, rockerbox breather, fixings for
tank to bodywork, all pipeclips and tiewraps to secure, painted black if required with "level" window strip.
|
|
£150.00 |
Car Kit |
 |
TEN201 |
|
Roller rocker set. Alloy posts with alloy spacers, roller tips and roller shaft bearings. 1.55 and 1.
65 ratio. Robust and beautifully presented, well engineered roller rocker set. TR2,3,4 & 4A. Reduce oil
temperature and frictional top end noise.
|
|
£475 |
Set |
 |
TEN202 |
|
Roller rocker set. Full length strengthened shaft with side load springs. Accurately engineered steel
supports. 1.55 or 1.65 ratio. Minimum tolerance on shaft rollers. TR5-6.
|
|
£595 |
Set |
 |
TEN203 |
|
TR5-6 Alloy rocker cover Polished alloy or crackle black finish avilable, customer to specify. Domed
stainless steel fixings. Unique neoprene oil seal contained in a channel so that gasket can not move out
sideways which is a major cause of oil leaks on other cover seal designs. Breather options suit both
original injection and four and six cylinder crank case breathing kits.
in brass breather. Chained vented chromed cap. (Hose extra).
|
|
|
£110.50 |
Each |
 |
TEN204 |
|
TR2-4A Alloy rocker cover Polished alloy or crackle black finish avilable, customer to specify. Domed
stainless steel fixings. Unique neoprene oil seal contained in a channel so that gasket can not move out
sideways which is a major cause of oil leaks on other cover seal designs. Breather options suit both
original injection and four and six cylinder crank case breathing kits.
|
|
|
£110.50 |
Each |
 |
TEN301 |
|
Alloy Lightweight Water Pump TR5-6 with 6 blade high output impellors to give greatly increased flow
through the head and cylinder block. Excludes press on pulley.
|
|
£125.00 |
Each |
 |
TEN302 |
|
Cast Iron Water Pump TR5-6 with 6 blade impellors to give increased flow
through the head and cylinder block. Includes cast iron press on pulley.
|
|
£99.50 |
Each |
 |
TEN303 |
|
Alloy Lightweight Water Pump (excludes pulley & Housing that are available separately.) TR2,3,4,4A
c/w Alloy multiblade impellor. Superior design giving greatly increased flow through the head and cylinder
block. Completely redesigned interior with reliable high quality bearing and push on alloy pulley that much
improves over the old woodruff key type. Multiblade alloy impellor for high output circulation. Weights:
Pump 0.7kgs(1.6lbs), Pulley (separate item) 0.3kgs(0.6lbs), Housing (separate item) 0.9kgs(2lbs), Total for
complete conversion 2kgs(4.4lbs) against original equipment 5kgs(11lbs).
|
|
£125.00 |
Each |
 |
TEN304 |
|
Cast Iron Water Pump TR2,3,4,4A c/w multiblade impellor. Superior internal design adding significant
reliability to the bearing and seals. Also the upgraded cast impellor will improve flow and improve cooling
efficiency. Press on Cast Iron or Alloy pulley will be required.
|
|
£97.50 |
Each |
 |
TEN305 |
|
Alloy Water Pump Engine Housing TR2 – 4A Lightweight alloy casting exactly replicating the original.
Better heat dissipation and can be painted or highly polished. Fitted with the Racetorations alloy water
pump and alloy impellor combination achieves a considerable weight saving at the front of the engine (see
TEN303).
|
|
£120.50 |
Each |
 |
TEN306 |
|
Alloy Water Pump Engine Housing TR250, 5 & 6 Lightweight alloy casting exactly replicating the
original. Better heat dissipation and can be painted or highly polished. Fitted with the Racetorations alloy
water pump and alloy impellor combination achieves a considerable weight saving at the front of the engine (
see TEN303).
|
|
£130.50 |
Each |
 |
TEN307 |
|
Cast Iron Pulley (press on) for any of the above water pumps.
|
|
£18.50 |
Each |
 |
TEN308 |
|
Alloy Pulley (press on) for any of the above water pumps.
|
|
£39.50 |
Each |
 |
TEN309 |
|
Alloy Pulley with keyway for standard pumps.
|
|
£49.50 |
Each |
 |
TEN401 |
|
Spun stainless steel inlet trumpets for Lucas injection TRs including air socks that are easily
removed for competition work or track days.
|
|
£145 |
Car Set |
 |
TEN402 |
Fully mapped fuel injection for all four and six cylinder TRs. 4 Cylinder TR shown. Instant
response, more power, copes with severe ambient conditions.
|
|
From £1750.00 |
Kit |
 |
TEN403 |
|
Weber Twin Choke Carburetors DCOE40 and DCOE45s brand new, jetted with stainless steel air inlet
trumpets and 'O' ring set to seal and fit to manifold. Any modifications to fittings e.g. fuel T pieces,
shorter trumpets or modified linkage charged extra.
|
|
|
£375.00 |
Each |
 |
TEN501 |
|
Adjustable ignition curve distributor TR2,3,4A Brand new complete units with an advance curve that
can be accurately adjusted by you to match your camshaft and the characteristics required by your engine,
whatever it's state of tuning. A well engineered and good looking distributor which is a huge leap forward
for smooth running, fuel economy and performance over all linear distributors. Your old unit not required.
Negative earth only.
|
|
£235.00 |
Each |
 |
TEN502 |
|
Adjustable ignition curve distributor TR250,5,6 Brand new complete units with an advance curve that
can be accurately adjusted by you to match your camshaft and the characteristics required by your engine,
whatever it's state of tuning. A well engineered and good looking distributor which is a huge leap forward
for smooth running, fuel economy and performance over all linear distributors. Your old unit not required.
Negative earth only. (On TR6 Tacho. requires conversion to electronic type see TEN503).
|
|
£255.00 |
Each |
 |
TEN503 |
|
Tachometer Conversion To electronic type. (Price only £145 exchange if purchased with TEN502
distributor)
|
|
£165.00 |
Exchange |
 |
TEN504 |
|
Alloy distributor Pedestal TR2 – 4A for use with standard distributor fitting but no tacho drive. To
be used with electronic tacho only.
|
|
|
£112.50 |
Each |
|
|
TEN505 |
|
Alloy distributor Pedestal TR2 – 4A. Exact replica of the original cast iron housing with tacho drive
take off. Good weight saving. Paint or polish as required.
|
|
|
£175.00 |
Each |
