 |
FBG001 |
Directional Brake Cooling Scoops- TR4 - 6. Direct fitting to disc brake caliper - inboard. Turns with
wheel picking up cool air from the forward facing scoops and directing this onto the caliper and disc. Bolt-on - no
trunking required. |
£66.00 |
pair |
 |
FBG101 |
|
Front Spoiler with Brake Cooling Ducts - TR6. Replacement for the existing spoiler. Allows airflow
to be directed to the front discs and calipers. The original spoiler prevents this without the use of ugly
additional pipework which is usually lacking in "mouth" area. Finished in gloss black fibreglass. Easy to
fit. Grey for own painting also now available. Without ducts also available.
|
|
|
£157.50 |
each |
 |
FBG102 |
Tonneau Shield - TR4A - 6. For use with aeroscreen. Neatens and fairs in the leading edge of the tonneau
across the width of the dash top. Countersunk for rivets or self tapping screw. The professional look. State if
air shields required both sides or drivers only.
|
£42.50 |
pair |
 |
FBG103 |
|
Competition Sidescreen - TR2 - 3A. Aerodynamic fairing for driver and passenger for all sidescreen
cars. For use with aeroscreens and windscreen. Shield clips to the top of the door which can be opened
with shield attached. Streamlines your TR and stops wind buffeting. Easily fitted and removed. Can be
painted any colour. Fitting brackets (4 required) extra, on request, see FBG104.
|
|
|
£65.00 |
each |
 |
FBG104 |
| Set of Shaped Brackets (For FBG103) |
|
|
£80.00 |
two pairs |
 |
FBG105 |
| Stop Light Nacelle - TR2 - 6. To accommodate high intensity bad weather warning lamp on boot panel
of TR2 - 6. |
|
|
£32.50 |
each |
 |
FBG106 |
|
Californian Mirror Nacelle LHD & RHD - TR2 - 3A. To replace air vent lid on TR2 - 3A and contain
a faired-in rear view Californian mirror for aeroscreen or racing use. Designed for use with LH or RH
aeroscreen deflector (heavy type, FBG109).
|
|
|
£45.00 |
each |
 |
FBG107 |
Ventflap Louvre - TR2/3A. Some combinations of areoscreen, mirror, auxillary windscreen prevent the use
of the standard lifting vent flap on the centre of the main bulkhead. This can be replaced with this small sporty
looking louvre vented fixed panel. |
£32.50 |
each |
 |
FBG108 |
|
Aeroscreen Deflector - TR2 - 3A. Fits LHD and RHD applications using Californian nacelle and mirror
or with Vent flap louvre. Deflects rainwater and air when used with aeroscreens. |
|
|
£60.00 |
each |
 |
FBG201 |
| Gearbox Tunnel - TR2 - 6 Split type. New design with removable rear section so that overdirve and
solenoids can be removed/inspected without unbolting the tunnel from the front bulkhead. Superb quality with
simulated black leather appearance. Very popular and a really good fit. |
|
|
£89.50 |
each |
 |
FBG202 |
Dashboard c/w Cubby Lid - TR2 - 3A. RHD only. Indistinguishable from steel when covered. Very good
quality replica. |
£89.50 |
each |
 |
FBG203 |
|
Door Panels - TR4A - 6. Neat fibreglass replacement for existing door panels - smooth finished for
painting to match interior of car. Handle, winder and rivet markings to assist fitting.
|
|
|
£38.00 |
pair |
 |
FBG301 |
|
Radiator and Air Feed Duct. TR6. Black textured finish, snug fitting and firm. Stays fresh and wipes
clean. Some self fitting required if you use the original air filter
|
|
|
£82.50 |
each |
 |
FBG302 and FBG303 |
|
Radiator Air Duct - TR4,4A,5 and 250
|
|
|
£67.50 |
each |
 |
FBG304/D and FBG305 |
Battery Box - TR2 - 6. A valuable guard against acid corrosion on all TR sports cars. Easy and quick to
fit. Black. Two sizes available, deep type favours TR2 - 3A, shallow TR4A - 6. |
£32.50 |
each |
 |
FBG306 |
| Oil Catch Tanks - TR2 - 6. Oil proof, neat, translucent 2 and 3 litre tank with breather for fast
road and race use designed to fit alongside battery in 4A - 6 if required. Uses breather facility cast into
all Racetorations 6 cylinder rocker covers. Facility for catchtank for left hand drive cars. State LHD or
RHD. |
|
|
£37.50 |
each |
 |
FBG307 |
|
| Spigot - 100mm (4") spigot to pipe air from radiator duct to carburetors or injection plenum
chamber. Can be supplied as part of the TR6 radcowl kit within the kit price. Can be retro fitted to all our
radcowls TR4,4A and TR5. Can be used as an airfeed duct in any TR, can be supplied with airsock filter and/
or standard TR6 100mm convoluted airfeed flexible pipe. |
|
|
£32.50 |
each |
